E2222 C3322 Flash Loader 7.4.7 Ssg V0.1 Lite.rar
LINK === https://cinurl.com/2tyR2W
How to Flash Samsung E2222 and C3322 with Flash Loader 7.4.7 SSG v0.1 Lite
If you have a Samsung E2222 or C3322 phone that is blinking or restarting, you may need to flash it with a new firmware. Flashing is the process of installing a new software on your phone's memory. This can fix various issues such as software bugs, corrupted files, or virus infections.
In this article, we will show you how to flash Samsung E2222 and C3322 with Flash Loader 7.4.7 SSG v0.1 Lite, a tool that allows you to flash your phone via USB cable. You will need the following items:
A Samsung E2222 or C3322 phone with a charged battery
A USB data cable compatible with your phone
A computer with Windows operating system
The Flash Loader 7.4.7 SSG v0.1 Lite tool, which you can download from here
The firmware file for your phone model, which you can download from here
Before you proceed, make sure to back up your important data from your phone, as flashing will erase everything on your phone's memory. Also, make sure to turn off any antivirus or firewall software on your computer, as they may interfere with the flashing process.
Step 1: Install the driver
First, you need to install the driver for your phone on your computer. The driver is located inside the Flash Loader 7.4.7 SSG v0.1 Lite folder that you downloaded. To install the driver, follow these steps:
Extract the Flash Loader 7.4.7 SSG v0.1 Lite.rar file using WinRAR or any other software that can extract compressed files.
Open the extracted folder and double-click on the Setup.exe file.
Follow the instructions on the screen to install the driver.
Restart your computer after the installation is complete.
Step 2: Run the flash loader tool
Next, you need to run the flash loader tool on your computer. The flash loader tool is also located inside the Flash Loader 7.4.7 SSG v0.1 Lite folder that you extracted. To run the flash loader tool, follow these steps:
Open the extracted folder and double-click on the Flash loader 7.4.7_SSG_v0.1_Lite.exe file.
A window will pop up with several options. Select LSI6410 and click OK.
Another window will pop up with two tabs: Application Binary and TFS File.
Under the Application Binary tab, click on Browse and locate the firmware file that you downloaded for your phone model.
The firmware file should have a .bin extension and should be named something like C3322xxxxx.bin or E2222xxxxx.bin.
Click on Open to load the firmware file into the flash loader tool.
Under the TFS File tab, click on Browse and locate the same firmware file that you loaded under the Application Binary tab.
Click on Open to load the firmware file into the flash loader tool.
Step 3: Connect your phone to your computer
Now, you need to connect your phone to your computer via USB cable. To do this, follow these steps:
Turn off your phone and remove the battery.
Insert the USB cable into your phone's port.
Press and hold the volume down key on your phone and insert the battery back into your phone while holding the key.
Your phone should enter download mode and display a yellow progress bar on its screen. 061ffe29dd