Pdfmonkeyrockerplans

How to Build a PDF Monkey Rocker Plans

A PDF monkey rocker is a fun and easy woodworking project that you can make with some basic tools and materials. A monkey rocker is a rocking chair that has a seat shaped like a monkey's face, with ears, eyes, nose and mouth. It is a great toy for kids and adults alike, and it can also be used as a decorative piece for your home.

In this article, we will show you how to build a PDF monkey rocker plans using a free template that you can download from our website. You will need the following materials and tools:

Wooden boards (we used pine)

Wood glue

Screws

Drill

Jigsaw

Sander

Paint or stain

Brush or roller

PDF monkey rocker template (download here)

Follow these steps to build your PDF monkey rocker plans:

Print out the PDF template and cut out the pieces. You will have four pieces: the seat, the back, the base and the rocker.

Trace the template pieces onto the wooden boards and cut them out with a jigsaw. Sand the edges to smooth them out.

Glue and screw the seat to the back, making sure they are aligned. Then glue and screw the base to the bottom of the seat.

Glue and screw the rocker to the bottom of the base, making sure it is centered and parallel to the back.

Paint or stain your PDF monkey rocker as you like. You can use different colors for the ears, eyes, nose and mouth to make it more realistic.

Let it dry completely before using it.

Congratulations! You have just built a PDF monkey rocker plans. Enjoy rocking on it or give it as a gift to someone who loves monkeys.

If you want to make your PDF monkey rocker more comfortable and durable, you can add some cushions and upholstery to the seat and the back. You can use any fabric or material that you like, such as cotton, fleece, leather or faux fur. You will need the following materials and tools:

Fabric or material of your choice

Scissors

Needle and thread or sewing machine

Pins

Batting or foam

Staple gun

Follow these steps to add cushions and upholstery to your PDF monkey rocker plans:

Cut out two pieces of fabric that are slightly larger than the seat and the back of your PDF monkey rocker. You can use the template pieces as a guide.

Sew the fabric pieces together along the edges, leaving a small opening for stuffing. Turn the fabric inside out and press it flat.

Stuff the fabric with batting or foam until it is firm and fluffy. Close the opening with a needle and thread.

Place the cushion on the seat or the back of your PDF monkey rocker and secure it with pins. Staple the fabric to the wooden board along the edges, making sure it is tight and smooth.

Repeat the steps for the other cushion.

Now you have added cushions and upholstery to your PDF monkey rocker plans. You can enjoy rocking on it even more or impress your friends with your DIY skills. aa16f39245